CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  

Conversion set for XB808 buggy to convert it to the XB808 2011 Specs. 

Authentic XRAY optional lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Fits XB808. 

Authentic XRAY lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.  

Composite upper plate for XB8 made from tough molded composite. 

Alu collar provides even spacing between bearings within front/rear XB808 diff bulkhead blocks. With capturing screws tightened, both bearings are strengthened in the block so they can support more load thus improving bearing lifespan. Set of 2. 

Front torque rod set with strong aluminum bar and tough composite balljoints. Includes pivotballs. Factory pre-assembled. 

XRAY has designed a new rigid but lightweight front brace for the XB8, adhering to the legendary attention to detail while also adding strength and saving weight. 

Authentic XRAY front alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. 

Authentic XRAY front alu shock tower for XB808 is CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. 

Front upper suspension arm inner ball joint for XB9 made from tough molded composite. 

Optional graphite front lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions.  

Right-side 12° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen.

The preset 12° caster block is integrated and non-adjustable.  

Right-side 14° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen.

The preset 14° caster block is integrated and non-adjustable.  

Authentic XRAY right-side 16° composite 2-hole caster block for XB9. Preset 16° caster is integrated and non-adjustable.  

Authentic XRAY right-side 10° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY right-side 12° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY right-side 14° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY right-side 16° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Left-side 12° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen.

The preset 12° caster block is integrated and non-adjustable.  

Left-side 14° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen.

The preset 14° caster block is integrated and non-adjustable.  

Authentic XRAY left-side 16° composite 2-hole caster block for XB9. Preset 16° caster is integrated and non-adjustable.
 

Authentic XRAY left-side 10° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY left-side 12° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY left-side 14° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY left-side 16° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  

Authentic XRAY right-side alu steering block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY right-side alu steering block with 5° kingpin for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Authentic XRAY right-side alu steering block with 10° king-pin for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Authentic XRAY left-side alu steering block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY left-side alu steering block with 5° King-Ping for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Authentic XRAY left-side alu steering block with 10° kingpin for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY right-side 10° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY right-side 12° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Authentic XRAY right-side 14° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY left-side 10° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY left-side 12° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Authentic XRAY left-side 14° alu caster block for XB9 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Molded composite bushings for installing ball-bearings in XB808 alu steering blocks #352256 and #352265. Also used to install ball-bearing in XB808 alu rear hub carrier #353356. Set of 2 different bushings. 

Molded composite bushings for XB808 alu caster blocks. Set of 2. 

Authentic XRAY set of alu front lower suspension holders for XB808, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Includes all parts necessary for complete front suspension holder system upgrade. 

Authentic set of XRAY alu front lower suspension holders, CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu front lower suspension holder for the FRONT of the front bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Eccentric bushings for adjusting suspension settings, made from tough composite. Fits XB808 alu suspension holders - square adj. roll-centers. Set of 2. 

Eccentric bushings for adjusting suspension settings, made from tough composite. Fits XB808 alu suspension holders. Set of 2. 

Authentic XRAY alu front lower suspension holder for the REAR of the front bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu front lower suspension holder for the FRONT of the front bulkhead, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY alu front lower suspension holder for the REAR of the front bulkhead, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

Front anti-roll bar for XB808. 2.0mm thick (unmarked). 

Front anti-roll bar for XB808, 2.2mm thick. Marked with 2 laser-engraved lines for easy identification. 

Front anti-roll bar for XB808, 2.3mm thick. Marked with 3 laser-engraved lines for easy identification. 

Front anti-roll bar for XB808, 2.5mm thick. Marked with 5 laser-engraved lines for easy identification. 

Front anti-roll bar for XB808, 2.6mm thick. Marked with 6 laser-engraved lines for easy identification. 

Front anti-roll bar for XB808, 2.8mm thick. Marked with 8 laser-engraved lines for easy identification. 

Authentic XRAY alu steering plate for XB808 is CNC-machined from 3mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Lightweight, ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. 

Adjustable left & right M5 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment. Length of 58mm. Set of 2. 

Adjustable left & right M5 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment. Length of 64mm. Set of 2. 

6.8mm ball stud for steering linkages with backstop prevents the steering linkage from disconnecting in crashes.  

Ball stud 6.8mm with backstop, made from special HUDY Spring Steel™.  

Ball stud 6.8mm with backstop, made from steel.  

Ball stud 6.8mm with backstop, made from steel, nickel coated. 

Machined alu countersunk shims for use with ball stud. Set of 10. 

Authentic XRAY rear alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. 

Authentic XRAY rear alu shock tower for XB808 is CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. 

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 

Set of molded composite eccentric bushings for #353356 XB808 Alu Rear Hub Carriers, used for adjustment of rear roll center suspension geometry. Exchanging the bushings allows 2 different roll center geometry settings.  

Strong mud protector is CNC-machined from strong FRP material. Great when running in wet and dirty racing conditions, protects the rear driveshafts and shocks from rocks, dirt and mud. Developed for direct installation with no additional body trimming or additional holes required. 

Optional graphite rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 

Authentic XRAY set of alu rear lower suspension holders for XB808, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Includes all parts necessary for complete rear suspension holder system upgrade. 

Authentic XRAY set of alu rear lower suspension holders, CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  

Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu rear lower suspension holder for the REAR of the rear bulkhead. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Authentic XRAY alu adjustable rear hub carrier for XB808 is CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY alu adjustable rear hub carrier for XB808 is CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. New adjustable rear hub carrier offers new and unique possibility to adjust roll-center in 1:8 off road cars.  

Authentic XRAY alu adjustable rear hub carrier for XB808 is CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 

Rear anti-roll bar for XB808, 2.2mm thick. Marked with 2 laser-engraved lines for easy identification. 

Rear anti-roll bar for XB808, 2.3mm thick. Marked with 3 laser-engraved lines for easy identification. 

Rear anti-roll bar for XB808, 2.4mm thick. Marked with 4 laser-engraved lines for easy identification. 

Rear anti-roll bar for XB808, 2.5mm thick. Marked with 5 laser-engraved lines for easy identification. 

Rear anti-roll bar for XB808, 2.8mm thick. Marked with 8 laser-engraved lines for easy identification. 

Rear anti-roll bar for XB808, 3.0mm thick. Without any laser-engraved lines for easy identification. 

XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.  

Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Tough molded composite shim set used for prolonging or shortening the rear wing for increased or decreased rear traction. Shims are positioned between the rear shock tower and the wing holders.  

CNC-machined aluminum braces for rear wing mount. Set of 2. 

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 

Composite center diff mounting plate set made from specially-formulated graphite composite mixture for increased strength and lower weight.  

CNC-machined graphite upper plate for center diff mounting. Includes composite inserts for brake cam posts. 

Set of 2 molded brake cam bushings for graphite center diff mounting plate #354050.  

CNC-machined graphite ventilated brake disk.

When using this graphite brake disk, it is necessary to use hardened steel brake pads (#354121) by themselves without Ferodo fibre-style brake pads glued to them. 

Laser-cut, heat-treated, precision-ground ventilated brake disk for XB8 ensures vibration-free operation. Rotating mass is reduced without sacrificing strength or durability. 

Laser-cut, heat-treated, precision-ground ventilated super-lightweight brake disk for XB8, GTX and XT8 ensures vibration-free operation. 

High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness.  

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. 

New ultra-efficient brake pads from special slip-free material. Set of 4. 

The 41-tooth large bevel gear for front differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 

43-tooth large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

41-tooth large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

Diff outdrive adapters front/rear differential made of self-developed, world-renowned HUDY Spring Steel™ - the toughest steel material available. 

XRAY offers lightweight CNC-machined center diff outdrive adapters. Made from HUDY toughened steel, the outdrives have been strategically machined to be lighter than standard #355070 center diff outdrive adapters. For serious racers who are conscious of weight savings. 

Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. 

The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB808 buggies… vastly improving the buggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the buggy, making it faster and easier to drive. 

The unique XRAY Active Center Differential™ is a high-performance, adjustable center gear differential for XB808 buggies, vastly improving the buggy’s speed and handling characteristics.  

3-bearing, 10-tooth bevel drive gear for XB808 front/rear differential. Manufactured from premium HUDY Spring Steel™, precision machined on a special gear machine and heat treated for maximum strength, durability, minimal wear, and extra-long lifespan. 

Molded case for XRAY Active Diff™ made from XRAY's own special composite mixture. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. 

Standard XRAY Active Diff™ segments are CNC-machined from very tough steel, and have very precisely-machined ‶V※ ramp grooves with 90° angle for easy engagement/disengagement. The segment is hardened to ensure long life and durability. The segments are laser engraved with ‶90°※ for easy and instant recognition. Set of 2. 

XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment. 

Precision internal gears of the XRAY Active Diff™ are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. Includes 2 bevel gears and 4 satellite gears. 

The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 

The 43T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with ‶Active Diff 43※ for easy and instant recognition. 

43-tooth large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 

42-tooth large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

41-tooth large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

Diff outdrive adapters for XB808 Active Diff™ made from world-renowned HUDY Spring Steel™ – the toughest steel material available. Set of 2. 

XRAY offers lightweight CNC-machined diff outdrive adapters for XB808 Active Diff™. Made from world-renowned HUDY Spring Steel™ - the toughest steel material available - the outdrives have been strategically machined to be lighter than the standard #355161 Active Diff™ outdrive adapters. Set of 2. 

The active center diff outdrives are CNC-machined on precision German long-turn machines and are manufactured from HUDY toughened steel. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. 

Precision-ground polished steel pins for XRAY Active Diff™ internal satellite gears. Set of 2. 

Polished chrome pin. Dia. x length = 2mm x 12mm for active diff. Set of 2 pieces. 

Machined internal bevel gear collars for XRAY Active Diff™. Set of 2. 

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 

Hardcoated aluminum wheel nut. Ribbed for secure tightening on the wheel axle. Set of 2. 

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  

Polished chrome pin for ECS drive shaft, 2.5 x 12.8mm. Specially hand-ground for maximum precision. Set of 2. 

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 

Shrink wrap for central CVD drive shaft prevents the pin from moving. 

CNC-machined alu chassis stand brace for XT9. The stands allow mounting of the graphite plate to the radio box plate to increase stiffness at the front of the car. 

Lower inner pivot pins only for #352301 Front or #353301 Rear Euros'05 TQ Suspension - Sets. Hardened steel, 4mm thick. Set of 2. 

Set of composite molded 8- and 10-hole shock pistons for two shock absorbers. 8-hole pistons are available with 2 different-sized holes (1.2 and 1.3mm) for changing damping (2 per piston). 10-hole pistons are available with 1.1mm holes.  

Set of molded composite 6-hole shock pistons for two shock absorbers. These 2-hole big-bore pistons are available with three different-sized holes (1.2, 1.3, and 1.4mm) for different damping characteristics. 

Set of composite molded bushing and shims for XB8, GTX & XT8 cars. 

CNC-machined pivot ball for mounting shock top mount to shock tower, made from premium lightweight 7075 T6 aluminum. Set of 2. 

CNC-machined steel screw pivot ball for mounting shock top mount to shock tower. Set of 2. 

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  

New ultimate-match front shock springs (C = 0.65) for front shocks. White color. Set of 2. 

New ultimate-match front shock springs (C = 0.70) for front shocks. Grey color. Set of 2. 

New ultimate-match front shock springs (C = 0.80) for front shocks. Light blue color. Set of 2. 

New ultimate-match front shock springs (C = 0.86) for XRAY front shocks. Blue color. Set of 2. 

New ultimate-match front shock springs (C = 0.92) for XRAY front shocks. Violet color. Set of 2. 

New ultimate-match front shock springs (C = 0.98) for XRAY front shocks. Purple color. Set of 2. 

New SOFT progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with ONE stripe for easy identification. 

New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with TWO stripes for easy identification. 

New MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with THREE stripes for easy identification. 

MEDIUM-HARD progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end. 

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  

MEDIUM-HARD long progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end.  

New ultimate-match rear shock springs (C = 0.47) for XRAY rear shocks. White color. Set of 2. 

New ultimate-match rear shock springs (C = 0.50) for XRAY rear shocks. Grey color. Set of 2. 

New ultimate-match rear shock springs (C = 0.57) for XRAY rear shocks. Light blue color. Set of 2. 

New ultimate-match rear shock springs (C = 0.61) for XRAY rear shocks. Blue color. Set of 2. 

New ultimate-match rear shock springs (C = 0.65) for XRAY rear shocks. Violet color. Set of 2. 

New ultimate-match rear shock springs (C = 0.70) for XRAY rear shocks. Purple color. Set of 2. 

New FRONT progressive springs are slightly progressive, but under more compression change characteristics to become more linear.  

New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  

FRONT progressive springs. Slightly progressive, but under more compression they change characteristics to become more linear.  

New REAR progressive springs are slightly progressive, but under more compression change characteristics to become more linear.  

New REAR progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  

Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

Alu flywheel for 4-shoe clutch made from Swiss 7075 T6 alu and hardcoated for extra durability. 

CNC-machined flywheel nut for 4-shoe clutch. Made from HUDY Spring Steel™. 

Aluminum Soft clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Medium clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Hard clutch shoes for 4-shoe clutch. Set of 4. 

Graphite clutch shoe made from special graphite mixture material.  

Soft clutch springs for 4-shoe clutch. Softer spring allows for earlier engagement. 

Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs. 

Hard clutch springs for 4-shoe clutch. Hard spring allows for later engagement point. 

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 

High-Torque Clutch set for XB8 is an important performance upgrade. The clutch provides a smoother and more continuous transfer of power from engine at very high RPM.  

13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 

Machined aluminum Labyrinth Cover fits all XRAY clutch bells to prevent dirt from entering the clutch assembly. Especially effective when used with V2 clutch bell due to its perfect fit. 

15T clutchbell manufactured on a precision manual gear machine from HUDY Gear Steel – a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan.  

17T clutchbell manufactured on a precision manual gear machine from HUDY Gear Steel – a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan.  

18T clutchbell manufactured on a precision manual gear machine from HUDY Gear Steel – a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan.  

Tapered collar for mounting flywheel to engine crankshaft. 

Graphite clutch shoe made from special graphite mixture material.  

Aluminum clutch shoes. Harder material allows for faster clutch engagement and higher corner speed. Set of 3. 

New soft clutch springs with improved shape helps prevent breakage. Softer spring allows for earlier engagement. 

New medium clutch springs with improved shape helps prevent breakage. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the earlier springs. 

New hard clutch springs with improved shape helps prevent breakage. Extra hard spring allows for later engagement. 

Medium clutch springs for High-Torque clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with earlier springs. 

Optional hard clutch springs for high-torque clutch, allow for later engagement. Silver color. Set of 3. 

New fuel tank features an integrated floating stone filter to ensure the fuel pickup is always in the correct orientation – even if your car isn’t. 

Authentic XRAY optional 1-piece engine mount is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY optional engine mounts for Nova-based engines. For use with #358714 XRAY optional 1-piece engine mount. CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Authentic XRAY optional engine mounts for Picco-based engines. For use with #358714 XRAY optional 1-piece engine mount. CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 

Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly. 

Inner + outer low-profile foam filter elements, and a tube of air filter oil. Set of 10. 

Large capacity aluminum fuel filter set. This fuel filter is different from others as it is captured in a holder and will not turn as the result of vibration. 

Fuel filter set made from tough composite material and the aluminum cap is machined from premium aluminum. A sieve is installed in the fuel filter. The body of the fuel filter has a slot that enables the filter to sit in the holder perfectly and prevents the filter from turning. 

Molded composite fuel filter mount and fuel tubing holders.  

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 3000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 5000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 7000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 8000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 10 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 15 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 20 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 30 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 40 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 50 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 60 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 80 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 100 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

Stylish XRAY Starburst wheels (white) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (orange) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (pink) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (yellow) are molded from light but very durable material. Set of 4. 

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 

M4x7 button-head machine screw, hex drive with hex also in the bottom. This screw can be used as optional downstop screw for XB8 kits.  

M2.2x6 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 

Flat washer. ID x OD x thickness = 13mm x 16mm x 0.2mm. Set of 10. 

Flat washer. ID x OD x thickness = 13mm x 16mm x 0.1mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 

Flat washer. ID x OD x thickness = 16mm x 20mm x 0.5mm. Set of 10 pieces. 

Silicone O-ring fits over 3.5mm shaft. 2mm thick. Set of 10. 

Silicone O-ring fits over 6mm shaft. 1.55mm thick. Set of 10.